High Power PC Card Adapter for ExpressCards : ECA16
Technical Features
 |
Host interface : 16-Bit PCMCIA Card; works in all PCMCIA slots (including CardBus hosts) |
 |
Datacard interface : ExpressCard 34mm (USB) including WLAN, WiMax, 3G (HSDPA and CDMA) and memory |
 |
Uses Elan's proven VMB5000 interface chip for maximum reliability and stability |
 |
Comes with drivers for Windows 2000 and XP with support also for Linux and Mac OSX also available |
| External dimensions : 16.9 x 15.5cm 3.8cm Packaged weight : 95g |
|
Do you need to use a new ExpressCard in an older laptop with only PCMCIA available? Now you can, using the ECA16. Plug in your ExpressCard, insert into your PCMCIA slot and away you go.
Key Features
- Boosts datacard signal strength
- More reliable connection particularly in weaker signal areas
- Higher data transfer speed
- Uses LESS notebook battery power
- PCMCIA interface makes ‘system crash’ less likely than with 32-bit Cardbus adapters
Buy an ECA16 NOW!
Extra power for the only reliable solution!
ExpressCards often have high power requirements. The PCMCIA port is capable of supplying the required power, but the ECA16 is the only adapter available to supply enough power to guarantee the performance of your ExpressCard. By drawing the full 5V which is only available to 16-bit PC card solutions, you can be sure that your ExpressCard won't suffer the performance problems that are associated with the lower power 32-bit adapter interface.
The ECA16 uses Elan Digital's VMB5000 chipset and draws only minimal power for itself - another advantage of the 16-bit solution.
Using USB2 technology, the ECA16 supports high speed applications beyond 3G (including HSDPA and HSUPA ExpressCards).
The ECA16 is designed to fit snugly into your PC card slot, with only a minimal protrusion outside of your laptop.
PCMCIA to ExpressCard adapter : ECA16
